Preparing the battery pack, Step 3 – Sony SPP-935 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
step 3
Preparing the battery pack
Insert the battery pack into the handset, then place the handset on the
base phone.
LLC
—1
Slide open the battery compartment lid of the
handset.
2
Insert the battery pack (with contacts facing
down) into the battery compartment.
I
5
ta
»
- fi>
№
O.
Close the battery compartment lied.
Place the handset on the base phone.
The CHAGE lamp lights up when the handset
is properly seated on the charge terminals of
the base phone. Charge the battery pack for
more than 8 hours so that the battery is fully
charged.
CHARGE lamp
continued
Getting Started 11™
Advertising