Automatic tuning, Presetting stations, Automatic tuning presetting stations – Sony STR-GX900ES User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Automatic Tuning
Presetting Stations
In automatic tuning, the receiver scans all the stations to
locate the one you want. If you do not know the frequency
of the station that you want, use automatic tuning.
POWER -► ON
2
1
O I ci
O
O r. \
[ ■ L - I I I
H.. i. 1 1- 1 I .. . . i.. .
______
....... _______ _
o
o
o
O
o o s ' O p O '
LEVEL
Rotate the FUNCTION knob to select TUNER.
The station's frequency number is displayed. If you
create a station index name (page 24), this name is
displayed instead of the frequency number.
If the index name is displayed, press
DISPLAY so that "NORMAL MODE" appears
on the display.
The frequency number is displayed.
Press FM/AM to select FM or AM.
Press INDEX SELECTfTUNING + or - .
For a higher frequency, press TUNING +.
For a lower frequency, press TUNING -.
When a station is received, automatic tuning stops.
To receive other stations, press the button again.
If the scanning stops frequently while receiving FM
stations
Press LEVEL so that the receiver stops only at the stations
with strong signals. To cancel this (to receive stations with
weaker signals), press LEVEL until HIGH goes off.
You will most likely want to preset the stations you listen to
often. The receiver can store a total of 30 FM or AM
stations. Up to 10 stations can be stored in three different
memory pages: A, B and C. (For example, a station is stored
as A7 or B3.)
Rotate the FUNCTION knob to select TUNER.
The station's frequency number is displayed. If you
create a station index name (page 24), this name is
displayed instead of the frequency number.
Tune in the station you want.
(See "Direct Tuning” on page 16 or "Automatic
Tuning" in the left column of this page.)
Press MEMORY.
MEMORY is displayed.
While "MEMORY" appears, press SHIFT to
select a memory page: A, B or C.
Each time you press SHIFT, A, B or C is displayed.
While "MEMORY" appears, press the
number you want to use.
Repeat steps from 2 through 5 for presetting other
stations.
To change a preset station
Preset a new station on the number of the station to be
changed. The station will be replaced.
IMPORTANT
If the power cord is disconnected for more than one month,
the preset stations will disappear from the receiver's
memory, and you will have to preset the stations again.
17