Step 2: setting up the remote commander, 1 press power to turn the tv on, 2 press set up on the front of the tv – Sony KV-27S10 User Manual
Page 9: 3 press ch
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
step 2: Setting up
the remote
commander
■
KV-27S10I29RS10I29RS10032S10I32S12
RM-Y116 remote commander
Insert two size AA (R6)
betteries in correct polarity.
■
KV-27V10129V11CI29V10M
RM-Y117 remote commander
Insert a size AA (R6)
battery in correct polarity.
Notes
• With normal use, the battery should last for approximately six
months.
• If you do not use the remote commander for an extended
period of time, remove the battery to avoid possible damage
from battery leakage.
• Do not handle the remote commander roughly. Do not drop it
step on it or let it get wet.
• Do not place the remote commander in locations where it is in
direct sunlight, near a heater, or where the humidity is high.
You can set up your TV easily by using AUTO SET UP
feature. It presets all the receivable channels. To set up
the TV manually, see "Setting cable TV on or off" and
"Presetting channels" (page 11).
If the TV is set to a video input, you carmot execute
AUTO SET UP. Press TV/VIDEO so that a channel
number appears.
SETUP
VOL+ CH- CH+ POWER
(Front of KV-27V10/29V11C/29V10M)
SET UP TV/VIDEO - VOLUME +
- CHANNEL + OPOWER
^3
Î11
SETUP
VOL+ CH- CH+ POWER
1
Press POWER to turn the TV on.
GROWER
2
Press SET UP on the front of the TV.
The menu appears.
SETUP
DEMO
VOL+
AUTO SET UP
CH+
FACTORY
CH-
PRESET
3
Press CH+.
-CHANNEL+
d
5
"AUTO PROGRAM" appears on the screen and the
TV starts scanning and presetting channels
automatically. When all the receivable channels are
stored, "AUTO PROGRAM" disappears and the
lowest numbered charmel is displayed. If the TV
receives cable TV channels, CATV is set to ON
automatically.
Getting Started