Jack type, Jack type (d, To connect optional av components – Sony LBT-LX50 User Manual
Page 6: To deactivate the demonstration
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
step 2: Hooking up the system
(continued)
Connect the FM/AM antennas.
Set up the AM loop antenna, then
connect it.
Jack type ®
Extend the FM wire
antenna horizontally.
Jack type
(D
AM loop antenna
Extend the FM wire
antenna horizontally.
If your system has a VOLTAGE
SELECTOR on the rear panel, set it
to the position of your local power
line voltage.
'St)
Connect the power cord to a wall
outlet.
The demonstration appears in the
display. When you press l/Cl), the
system turns on and the demonstration
automatically stops.
If the supplied adapter on the plug does
not fit your wall outlet, detach it from
the plug (only for models equipped with
an adapter).
To connect optional AV
components
See page 41.
To deactivate the demonstration
When you set the time (see "Step 3 Setting the
time"), the demonstration is deactivated.
To activate/deactivate the demonstration
again, press DISPLAY (for LBT-LX50/LX30/
LX7/LX5) or DEMO (STAND BY)(for other
models) while the system is off.