To change the time, Notes, Step 4: presetting radio stations – Sony LBT-LX50 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Tip
If you make a mistake, start over from step 1.
step 3: Setting the time
(continued)
To change the time
The previous explanation shows you how to set the
time while the power is off. To change the time
while the power is on, do the following:
1
Press ©/CLOCK SET.
2
Press TUNING +/- to select SET CLOCK.
3
Press ENTER/NEXT.
4
Perform steps 2 through 5 in the previous
explanation.
Notes
• You cannot set the time in Power Saving mode
(LBT-LX50/LX30/LX7/LX5 only, see page 10).
• The clock setting is canceled when you disconnect
the power cord or if a power failure occurs.
Step 4: Presetting
radio stations
You can preset the following number of
stations:
— 20 for EM and 10 for AM
The bands you can select depend on the kind
of tuner built into your system. Confirm the
bands by pressing TUNER/BAND
repeatedly.
l/(!)
^
^
(Power) I j
54 2
Press TUNER/BAND repeatedly
until the desired band appears in
the display.
Each time you press this button, the
band changes as follows:
EM-.-►AM
8