How to set the program start timer – Sony KV-13TR24 User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
How to Set the Program Start TIMER
Make sure that the clock has been set correctly before setting the program start TIMER.
If you have made a mistake, press CLEAR and return to step 3.
At the preset time, the selected channel will appear on the screen
and the TIMER lamp will go out The TIMER will operate whether
you are watching a TV program or a VCR playbadt or even if you
have turned off the TV.
If no button is pressed within 2 hours after the preset time, an
“OFF' indication wili appear on the screen for 1 minute, if a button
is still not touched during the 1 minute, the TV will turn off
automatically as a safety precaution.
The TIMER operates only once, but the time and the channel wid
remain in the unit's memory.
If you want to preset the same channel at the same time for a
future date, press OFF/REPEAT. The TIMER lamp wid light up
to indicate that the TIMER has been reactivated.
If you want to deactivate the TIMER, press OFF/REPEAT
again so that the TIMER lamp goes out It is not necessary to
summon “TIMER page” to use the OFF/REPEAT button.
Furthermore, this button is effective even if the TV has been
turned off.
20
To clear the TIMER setting, summon “TIMER page” and press
CLEAR.
To reset, clear the setting and follow the steps from step 3.