Sony LBT-D670AV - Manual (Page 19)

3
Choose how you want the tape to record
and press DIRECTION repeatedly until
the desired mode appears.
Position Operation
Dubbing stops at the end of
one side
When the tape in one deck
comes to the end of the front
side, it reverses immediately
regardless of the tape position
in the other deck.
RELAY When the tape in one deck
reaches its end of the front
side, it stops until the other
tape comes to its end, and
then both tapes reverse
together.
4
Press HIGH SPEED DUBBING.
The REC and DO (pause) lamps light and
deck B stands by for recording.
The [> lamp lights up and the <1 lamp
flashes for a few seconds, then goes off.
)
"^9
Side in recording
pause mode
If you want to start recording from the
reverse side, press <1 so that the <1
lamp lights steadily.
5
Press DD on the tape player.
The tape player starts dubbing at high
speed.
If you set DIRECTION to CZ15 or
RELAY, recording always stops_at the
end of the reverse side.
To stop dubbing
Press □ on deck A or deck B.
If you select another sound source while
dubbing
Dubbing stops.
You do not have to press DOLBY NR with
high speed dubbing
The tape in deck B is automatically
recorded in the same state as the tape in
deck A.
Dubbing Another Tape
Manually
When you want to dub only part of the
tape, dub manually at normal speed. Use
the buttons on the unit and TYPE 1 (normal)
or TYPE II (CrCb) tapes for recording.
5
4
3
■ DOLBY
NR
1
Press FUNCTION repeatedly until
“TAPE" appears in the display.
2
Press = EJECT and insert a recorded
tape in deck A with the side you want to
play facing forward.
Also, insert a blank tape in deck B with
the side you want to record on facing
forward.
Recording and playing will start from
the front side of the tape, unless you
ha\-e changed the playing direction
before recording.
Make sure the tabs on the cassette in
deck B ha\'e not been removed.
3
Select dual or single sided recording.
To dub Press DIRECTION to
select
One side
Both sides* CZI) or RELAY
* Recording always stops at the end of the
rer erse side. Be sure to start from the
front side.
4
Press REC.
The REC and DD (pause) lamps light up
and deck B stands by for recording.
The O lamp lights up and the <l lamp
flashes for a few seconds, then goes off.
■> Press OD on the tap>e player to release
recording pause.
Recording starts on deck B.
If you set DIRECTION to C~5 or
RELAY, recording always stops at the
end of the reverse side.
6
Press <] or t>- on deck A.
The tape on deck A starts playing.
To stop dubbing
Press □ on deck A or deck B.
Notes
•
When dubbing tapes originally recorded
with Dolby NR B, the dubbed tape is
automatically recorded with Dolby NR B.
• When you want to record a tape recorded
without Dolby NR B onto another tape
using Dolby NR B, press DOLBY NR so
that "tXJLBY NR B" appears in the
display.
J
pause mode
If YOU want to start recording from the
reverse side, press <1 so that the <1
lamp lights steadily.
Chapter 4: the Tape Player 19