Sony RM-TP502 User Manual
Page 23
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
6
Select the MAKER.
FUNCTiaNtUSER IR: RAKER CODE
Í0UND
I Sony VTRl
Sony VTR2
Sony VTR3
Admiral VCR
Aiwa VCR-1
Select the maker from the maker list.
The COMMAND list appears according to the maker
you selected.
7
Select the COMMAND.
^ mcmi SETUP:
select
csrhand
HACmi BOK
N0.2
r CANCEL
C To clear the programmed MACRO
S.?Ioct the BOX Number of the MACRO you want to dear in step
4, Si'lect "MACRO CLEAR" in the CATEGORY in step 5. The
items of the BOX are deared.
V
To set "WAIT TIME"
Select the BOX Number of the MACRO you want to set the wait
time for in step 4, Select "WAIT TIME" in the CATEGORY in step
3.
The wait time list (1 to 10 second in 1 second increments)
appears. Select the time you want to delay. After you selected, the
BOX Number list reappears.
If you press ALL CLEAR on the receiver, all the registered
MACRO programs are cleared.
Note
If you want to set the command "POWER" for STR-DA355ES as
well as additional commands for STR-DA555ES (for example,
"switch the function to VIDEO 1") to be performed in succession
as a MACRO, set a 1 second WAIT TIME between each
command.
O
■o
(D
Select the command you want to register.
The items selected in step 5 to 7 are registered in the
box selected in step 4.
The BOX Number list reappears.
23