Location of parts and basic operations, Front panel, M back light/commander off – Sony RM-TP502 User Manual
Page 9: 2] touch panel, 3] vol +/- buttons, 4] jog dial control, H] system/standby button, 1] muting button, 3 contrast control, 8] sleep button
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Location of
Parts and Basic
Operations
Hus chapter provides information
about the locations and functions of
the buttons and controls on this unit.
Front panel
m BACK LIGHT/COMMANDER OFF
Press to turn the backlight on or off. Hold down for
about 2 seconds to turn the LCD off. When the LCD is
off, press to turn on the LCD and backlight.
• To prolong use of the batteries, the LCD automatically
turns off if there are no commands entered in the touch
panel for 10 seconds.
• To view the LCD display without turning on the backlight,
touch the touch panel when both the backlight and LCD
are off.
[
2
] Touch panel
Touch to operate. The commander turns on
automatically.
[
3
] VOL +/- buttons
Use to adjust the volume of the receiver.
[
4
] JOG DIAL control
Rotate to scroll through items in a list (etc.).
Push to select the highlighted item.
H] SYSTEM/STANDBY button
Normally used to turn off all Sony components. Can
also be used to turn the receiver on or off depending
on the settings made in the SETUP screen (see page
24).
[1]
MUTING button
Use to mute the sound of the receiver.
[3 CONTRAST control
Use to adjust the contrast of the LCD.
[8] SLEEP button
Use to operate the receiver's sleep function. The sleep
settings appear in the receiver's display, not the
commander's LCD.
O
n
a
5'
3
0
X
Ql
2.
U)
fi)
3
a
a
o>
a
'
O
V
fD
S
0
’
3