Samsung HT-TX72 - Manual (Page 13)

Connecting Audio from External Components (con t) Connecting the FM Antenna
AUX2 : Connecting an External Analog Component
Analog signal components such as a VCR.
1 Connect the AUX IN 2 (Audio) on the Home Theater to the Audio Out of the external analog component.
■ Be sure to match connector colors.
2 Press the AUX button on the remote control to select <AUX2> input.
■ You can also use the FUNCTION button on the main unit.
The mode switches as follows : DVD/CD DIGITAL IN AUX 1 AUX 2 HDMI IN USB FM XM.
' You can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the VCR to
this product.
OPTICAL : Connecting an External Digital Component
Digital signal components such as a Set-Top Box.
1 Connect the Digital Input (OPTICAL) on the Home Theater to the Digital Output of the external digital
component.
2 Press the AUX button on the remote control to select <DIGITAL IN>.
■ You can also use the FUNCTION button on the main unit.
The mode switches as follows : DVD/CD DIGITAL IN AUX 1 AUX 2 HDMI IN USB FM XM.
1 Connect the FM antenna supplied to the FM 75i2 COAXIAL Jack.
2 Slowly move the antenna wire around until you find a location where reception is good, then fasten it
to a wall or other rigid surface.
• This unit does not receive AM broadcasts.
Cooling Fan.............................. ^ .......
The cooling fan supplies cool air to the unit to prevent overheating.
Please observe the following cautions for your safety.
■ Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the
unit may rise and may damage it.
■ Do not obstruct the cooling fan or ventilation holes, if the cooling fan or ventilation holes are
covered with a newspaper or cloth, heat may build up inside the unit and fire may result.
24 25