Sony STR-DE425 - Manual (Page 10)

Receiver Operations
Changing the factory setting of a
function button
L l I
If the hictor\' settings of the FUNCTION buttons
(page 9) don't match your system components, vou can
change them. For example, if vou have two CD players
and vou don't have a tape deck or an MD recorder,
you can assign the TAPE/MD button to your second
CD player.
Now vou can use the TAPF/MD button to control
a second CD plaver.
To reset the setting to the factory setting
IC'poat tlio above procedure.
Note that the settings of the TUNER and PFIONO
buttons cannot be changed.
Numeric buttons
■ SYSTEM
CONTROL/
FUNCTION
1 Hold down the SYSTEM CONTROL/FUNCTION
button whose function you want to change
(TAPE/MD, for example).
2 Press the corresponding numeric button of the
component you want to assign to the SYSTEM
CONTROL/FUNCTION button (1 - CD player,
for example).
The numeric buttons are assigned to select the
functions as follows;
Numeric button Operates
1 CD player
2 - DAT deck
3 MD deck
4 Tape deck A
5 Tape deck B
6 LD player
7 VCR {remote control mode VTR ] *)
8 VCR (remote control mode VTR 2 * ' )
9 VCR (remote control mode VTR 3*)
0 TV
>10 DBS
Enter DVD
Sony VCRs are operated with a VTR 1, 2 or 3 setting.
These correspond to Beta, Hmm and \’HS respectivelv.
10