Presetting radio stations, To change a preset station, Note – Sony STR-DE425 User Manual

Page 12: Tuning preset stations (preset tuning), You can tune by scanning the preset stations, Receiver operations

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Receiver Operations

Presetting Radio Stations

^ oil'll most likely want to preset the receu er with the
radio stations you listen to often so that you don't have
to tune in the station every time.jjdie receiver can store
a total of 30 FM or AM stations. You can store the
stations on preset numbers combining 3 characters (A,

B, C) and numbers (0 - 9). For example, you can store a
station as preset number Al, B6 or C9, etc.

PRESET TUNING Numeric buttons

a

;l 1

S3 CZI—1

O

c 0

0

QOP

MEMORY SHIFT

TUNER

1

Press TUNER.

The last received station is tuned in.

2

Tune in the station you want.

If you are not familiar with how to tune in a
station, see "Receiving Broadcasts" on the
previous page.

3

Press MEMORY.

"MEMORY" appears for a few' seconds.
Do steps 4 and 5 before "MEMORY" goes out.

4

Press SFFIFT to select a character (A, B or C).

Each time you press SFilET, the letter "A," "B" or
"C" appears in the display.

If "MEMORY" disappears, start again from step 3.

5

While MEMORY is displayed, press the number

you want to use (0 to 9).

6

Repeat Steps 2 to 5 to preset other stations.

To change a preset station

Preset

<1

new station on the number vou want to change.

Note

If the AC power cord is disconnected for about one week,

the preset stations will be cleared from the receix er's

memory, and vou will have to preset the stations again.

Tuning preset stations (preset tuning)

You can tune directly to a preset station bv entering its
preset number. If vou don't know' w'hich stations are
preset on which numbers, you can tune bv scanning
the preset stations.

1

Press TUNER.

The last received station is tuned in.

2

Press SHIFT to select a character (A, B or C), then

press the number.
For example, select A and then press 7 to tune m
the station preset as A7.

You can tune by scanning the preset stations

First press TUNER and then press PRESET TUNING *

or - to select the station you want. Each time you press

the buttons, the preset numbers change as follows:

■ Al

• A2-

■ AO ■

•C0<

• B1

■ C2 •

• BO •

• Cl-

12

Advertising
This manual is related to the following products: