Sony MDP-333 - Manual (Page 21)

To Play Only Certain Chapters - Program Playback
Example Play LD chapters 5, 4, 2, 6 - In that order.
3
PGM FRAME; TIME r CLEAR
A B C
rn m i~5~i
D E F
1^ QD CO
rn m m
•O CD
SHUFFLE MONITOR
a a
REPEAT APAUSE;
Ô a
pFioi m □ □ a
AUTO
a □ S
czi m □
CUSTOM
a
VOLUME CHANNEL
ran
S S iZD
ACS/AMS
nisi t>^
STOP PAUSE
CZ] ÜD
PLAY
[>»-
To release or cancel program playback
Press the CLEAR button or the 1 /ALL button. The unit
resumes normal playback.
To repeat program playback
Press the REPEAT button, then the REPEAT is displayed.
To move to a preceding or following programmed chapter
Press the KM or button.
To check the program contents during program playback
Press the PGM button. The program is displayed for about 3
seconds. The currently playing program number will flash.
Cautions
• When the shuttle ring is kept turned to the forward direction
during program playback and the playback comes to the end
of the current selection, the next programmed chapter will
be played back. When the shuttle ring is kept turned to the
reverse direction, the unit will not go back to previous
chapters. If you want to move a preceding programmed
chapter, keep Md button pressed until the desired
programmed number comes up.
• If not-existing chapter numbers on a disc are entered, the
program cannot be conducted.
• Programmed contents are stored until the disc is removed or
the power is switched off.
LD with TOC Data
When you program for an LD with TOC data, the following
display is shown.
Example: 5, 4, 2, 6 are entered.
Press the PGM button.
PGM
5
PGM indication lights in the player's display window.
2 Press the Number buttons 5 4 2 6.
For LDs containing TOC
(Table of Contents) data, the
total playback time of
programmed chapters is
shown.
If you make a mistake
To start ovar To change a numbw
Press the CLEAR and PGM Press the SEARCH/NEXT (to
button and enter the correct advance) or BACK (to back
number. up) buttons until the incorrect
number on the screen flashes.
rCLEAR-i PGM
SEARCH
/NEXT BACK
5^5 G
“
5
Then enter a new number.
To enter chapter numbers over 10
Use the +10 and 0 buttons.
Examples: To enter 10:1+101 ^
I 0 1
To enter 14:1+101 -> I 4 I
To enter 20: [ 4 ^ [+T6I - ■ m
If the +10 button is pressed by mistake
Press the CLEAR button, then press +10 and other buttons
for desired number.
mi
Currently playing
chapter
Total playback time of all
programmed chapters
Order in which the currently playing chapter is programmed
If the chapter number 0 or chapter numbers higher than 21
are entered, or if the total pla^ack time exceeds 100
minutes, the total playback time will not be shown.
3 Press the [> button.
SEARCH C-5 /-26179 PLAY
CHAPTER 5
PROGRAM
PROGRAM
Searching for the Playback starts from
first programmed the beginning
chapter of chapter 5.
After playing all programmed chapters 5, 4, 2, 6, in order,
playback stops.