Hookup 3: vcr setup, Step 3: hookups (continued), Press easy set up on the vcr – Sony SLV-998HF User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
step 3: Hookups (continued)
Hookup 3:
VCR setup
1
Set the RF UNIT switch to
CH 3 or CH 4, whichever
. channel is not used in your
area. If both are used, set the
switch to either channel.
For details, see page 87. If
you made A/V connections
(from page 9), you can skip
this step.
2
Press EASY SET UP on the
VCR.
O
The LANGUAGE menu appears. Change the
on-screen display language to Spanish
(ESPAÑOL) or French (FRANÇAIS) if desired,
and press OK. For details, see page 32.
© The CLOCK SET menu appears. Select AUTO
and press OK. For details, see page 33.
© The SMART CH MAPPING menu appears.
Press CURSOR t / ' ^ / ' ^ / ^ t o enter the ZIP/
POSTAL CODE in your area and press OK. (You
can also use the number buttons to enter the
ZIP/POSTAL CODE.)
O The CABLE BOX menu appears. Select OFF and
press OK.
© The TUNER PRESET menu appears. Set
ANTENNA/CABLE to ANT and press OK. For
details, see page 44.
EI»16USH :
ESPAÑOL
FRANÇAIS
Use to seIec t
Then push |OK|
Push [
easy
set
UPI to quit
lAUTO
imanual
I
Use to se l ec t
Then push |OK|
Push I
e
ÂSŸ SËTÜPI to quit
ZIP / POSTAL CODE
Enter your 2 IP/POSTAL
CODE us i ng l0-9i o r It
and keys.
then push jOj^
Use to select
Push lEASY SET UPl to quit
ANTENNA / CABLE
(HH
çâ
I
lê
]
Use to select
Then push |OK|
Push (
easy
set
~0^ to quit
18 Getting Started