Sony SLV-998HF - Manual (Page 33)

Setting the clock
Using the Auto Clock Set
feature
Some TV and cable channels transmit
time signals with their broadcasts. Your
VCR can pick up this time signal to
automahcally set the clock.
The Auto Clock Set feature works only if
a chaimel in your area is broadcasting a
time signal. If broadcasters in your area
are not yet sending time signals, set the
time manually (page 37).
Before you start...
• Turn on the VCR and the TV.
• Set the TV to the VCR channel
(channel 3 or 4). If your TV is
connected to the VCR using A/V
connections, set the TV to video input.
• Press TV/VIDEO to display the
VIDEO indicator in the VCR's display
window.
• Press INPUT SELECT so that a
charmel number appears in the VCR's
display window.
-MENU
OK
-CURSOR
1
-Press MENU, then press CURSOR ♦ /4 to
^ ^ move the cursor to CLOCK SET and press
<J
•CURSOR
D> When using the EASY SET UP procedure,
skip this step.
•OK
a
iAUtO IMANU^
Us® I'*' to sol ®0 t
Then push
Push I me NUI to quit
b Press CURSOR ^ ^ to select AUTO,
CURSOR
then press OK.
•OK
-O
IWiNO I
Use 1»»1 to select
Push [MEN u I t o quit
continued
Getting Started 33