Dbs connections, Connecting a dbs (direct broadcast, Satellite) receiver – Sony KV-36XBR200 User Manual
Page 11: Dvd connections
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
DBS Connections
Connecting a DBS (Direct Broadcast
Satellite) receiver
1
Connect the cable from your satellite
antenna to your DBS receiver.
2
Attach the coaxial connector from your
cable or antenna to VHF/UHF on your TV.
3
Using A/V connectors, connect AUDIO
and VIDEO OUT on your DBS receiver to
AUDIO and VIDEO IN on your TV.
Connecting a DBS (Direct Broadcast
Satellite) receiver and a VCR
1
Connect the cable from your satellite
antenna to your DBS receiver.
2
Attach the coaxial connector from your cable
or anterma to VHF/UHF IN on your VCR.
3
Using a coaxial connector, connect VHF/
UHF OUT on your VCR to VHF/UHF on
your TV.
4
Using A/V cormectors, connect AUDIO
and VIDEO OUT on your DBS receiver to
AUDIO and VIDEO IN on your VCR.
5
Using A/V connectors, connect AUDIO
and VIDEO OUT on your VCR to AUDIO
and VIDEO IN on your TV.
For optimum picture quaiity, use S VÌDEO
instead of the yellow A/V cable. S VIDEO does
not provide sound, your audio connectors
must still be connected.
2
(Real ol TV)
Disconnect all power sources before making any connections.
0
CONVERTER
SVBEO-
0
VCEO -
VHFAIHF
(»«r
Loflj
-*©
AUDIO-R (red)
AUDIO-L (white)
VIDEO (yellow)
VMC-810S/820S (not supplied)
Pressing TV/VIDEO on the remote control will
allow you to view from the DBS or VCR.