Sony KV-36XBR200 - Manual (Page 7)

Note about the AC Power Cord
The AC power cord is attached to the rear of
the TV with hooks. Use caution when
removing the AC plug from its holder. Gently
slide the cord in the upward direction,
without removing the cord from the two
lower hooks.
You can
Do not remove
the cord from
these hooks.
Cable or Antenna Connections
Connecting directly to cable or an
antenna
The connection you choose will depend on the
cable found in your home. Newer homes will
be equipped with standard coaxial cable (see
A); older homes will probably have 300-ohm
twin lead cable (see B); still other homes may
contain both (see C).
75 ohm
coaxial cable
V H F o n l y
or
VHF/UHF
or
Cable
VHF only 300-ohm twin
lead cable
(Redr of TV)
V H F / U H r
(Rear of TV)
VHF/UHF
Antenna connector
75-ohm coaxial cable
VHF f
A
and
(Rear of TV)
VHF/UHF
UHF
EAC-66 U/V mixer
(not supplied)
300-ohm twin lead cable
Cable and antenna
You may find it convenient to use the
following set up if your cable provider does
not feature local channels that you are able to
receive using an antenna.
CATV cable
(Rear of TV)
AUX
(No connection "TO
CONVERTER" in this case)
Antenna cable
TO CONVERTER
do
VHF/UHF
Select cable or antenna mode by pressing
ANT on the remote control.
Note
• In order to receive channels with an
antenna, you will need to turn your
CABLE to OFF and perform the AUTO
PRCKTRAM function, (see "CHANNEL
SET UP" on page 26)