Wer èources, Using a wall outlet for indoor use, To remove the connecting plate – Sony GV-S50 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
^wer èources
Using a Wall Outlet for Indoor Use
Use the supplied AC-S10 AC power adaptor.
1
Plug in the AC power adaptor to a wall outlet.
The POWER lamp (green) on the AC-S10 lights up and the power turns on.
2
Insert one end of the connecting cord (supplied with the AC-S10) into the DC OUT jack of the
AC-S10.
3
Align the upper side edge of the connecting plate with the white line printed on the video
recorder/monitor so that the slots of the connecting plate (the other end of the connecting
cord) are postitioned over the tabs of the battery mounting surface.
4
Press the connecting plate and slide it in the direction of the
>■
mark.
To remove the connecting plate
Slide out the connecting plate while sliding the ВАТТ release knob.
CAUTION
TO PREVENT ELECTRIC SHOCK. DO NOT USE THIS POLARIZED AC PLUG WITH AN EXTENSION
CORD. RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO
PREVENT BLADE EXPOSURE.
• The unit is not disconnected from the AC power source as long as it is connected to a wall outlet.
• One blade of the plug is wider than the other for the purpose of safety and will fit into a wall outlet only
one way. If you are unable to insert the plug fully into the outlet, contact your dealer.
• While the unit is in use. particularly during charging, keep it away from AM receivers and video
equipment because it will disturb AM reception and video operation.
12