Sony GV-M20 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Recording or Editing Tapes
Conriect the REMOTE terminal on this unit and the CONTROL L
(he other VCR's LANC mode to 'M.'
PiayDacWpause on the other VCR and recordmgrpause on this ui
the other VCR Dy pressing only one button.
inal on the other VCR, and then st
n Be operated simultaneously Iron
2 Press * or ▼ to select 'REC MODE."
3 Press ^ or ► to select "SP" or “LP.'
■« VOL
ENTER
Q
4 Activate the EDIT luiKtIon It It it provided with the other VCfl.
5 Locate the playbacit at«t point and presa the pause button on the other VCR.
C
in the direction of the arrow and press PAUSE N
IS now in recording pause mode
©
7 Press SYNCHRO EDIT on the other VCR to raleaee the pauae.
8 Prase SYNCHRO EDIT on the other VCR to psuee both units again.
9 Repeat steps 7 and 8 to edit other scenes.
i 10 After editing is completed, praea the stop buttons O Oh this unit) on both units to stop
I playback at>d recording.________________________________________________________________________________
About U <LANC)
1-ANC stands tor Local Applicalion Control Bus System. The LANC terminal is used for controlling the tape
transport of video equipment and peripherals connected to it This terminal has the same function as
those indicated as CONTROL L or REMOTE.
I
By adding an editing controller to the video equipment connected through the LANC terminals, ih
:
various
piece
of equipmenf can be operated iviTh the
controOer.