Specifications – Crestron electronic CNX-PBAR4 User Manual
Page 6
Professional Balanced Audio Receiver
Crestron CNX-PBAR4
Specifications
Specifications for the CNX-PBAR4 are given in the following table.
CNX-PBAR4 Specifications
SPECIFICATION DETAILS
Power Requirements
24W (1A @ 24VDC), Power Pack, PW-2410RU, included
CAT5 Cable Length
Up to 500 feet maximum each from all devices.
RJ45 IN Port
Input Pins 1, 2, 3, 6
Output Pins 4, 5, 7, 8
Impedance
Signal Level
Shielded (8-pin) Female
Balanced In
Balanced Out
600 Ohms
4VRMS max differential
RJ45 OUT Port
Output Pins 1, 2, 3, 6
Input Pins 4, 5, 7, 8
Impedance
Voltage Level
Shielded (8-pin) Female
Balanced Out
Balanced In
600 Ohms
4VRMS max differential
RCA Audio Output
Output Type
Connector
Impedance
Voltage Level
Unbalanced / Standard Line Level
RCA Female
100 Ohms
2VRMS max.
Audio Specifications
Total Harmonic Distortion
Signal to Noise Ratio
Common Mode Rejection
Frequency Response
< 0.005%
>100dB
>90dB
20 Hz to 20 KHz ±0.2 dB
Operating Temperature &
Humidity
41° to 113°F (5° to 45°C)
10% to 90% RH (non-condensing)
Dimensions & Weight
Height:
1.7 in (4.32 cm) (1 rack space)
Width:
19.0 in (48.26 cm) – with ears (included)
17.03 in (43.24 cm) – without ears
Depth:
6.67 in (16.94 cm)
Weight:
2.88 lb (1.29 kg)
2
• Professional Balanced Audio Receiver: CNX-PBAR4
Operations Guide – DOC. 8183