Crestron electronic CNX-PBAR4 - Manual (Page 7)

Crestron CNX-PBAR4 Professional Balanced Audio Receiver
Physical Description
The CNX-PBAR4 is housed in a black enclosure with labeling on the front and back
panels. For unit dimensions, refer to the physical view drawing below.
CNX-PBAR4 Front Panel
CNX-PBAR4 Physical View
17.03 in
(43.25 cm)
1.
70 in
(4.
32 cm)
6.
68 i
n
(16.
97
cm)
Ports and Indicators
The CNX-PBAR4 has a single LED power indicator (PWR) on the front panel. The
LED is illuminated when the unit is connected to and receives 24VDC power from
the supplied power pack.
All audio input/output ports are located on the rear panel.
NOTE: This unit is a non-Cresnet device.
As shown in the illustration on the next page, the unit’s ports consist of four identical
audio I/O groups of input and output connectors. Also located on the rear panel is the
male connector for 24VDC input power from the supplied power pack, PW-2410RU.
The ports and controls are described in the paragraphs following the illustration.
Operations Guide – DOC. 8183 Professional Balanced Audio Receiver: CNX-PBAR4 • 3