Sony STR-DE515 - Manual (Page 15)

Getting the Most Out of Dolby
Pro Logic Surround Sound
To obtain the best possible Dolby Pro Logic Surround
sound, first select the center mode according to the
speaker system you have. Tlien, adjust each speaker
volume and delay time.
Note that you must have at least one additional pair of
speakers and/or one center speaker to do the following
adjustments.
CENTER SURROUND SURROUND
REAR EFFECT/
LEVEL+/- DELAY TIME
SET-UP
' SURROUND
MODE
■ TEST TOME
CENTER
LEVEL +/-
Selecting the center mode
The receiver offers you four center modes: Phantom, 3
Channel Logic, Normal, and Wide. Each mode is
designed for a different speaker configuration. Select
the mode that best suits your speaker's system
configuration:
1 Press SURROUND ON/OFF to turn on surround
^ sound.
2 Press SURROUND MODE repeatedly to select the
Dolby surround sound field (PRO LOGIC or
C. STUDIO mode). '
3 Press SET-UP repeatedly until the set-up you
want appears in the display. Select the set-up as
follows:
If you have Select So that
Front and rear
speakers, no
center speaker PHANTOM The sound of the
center channel is
output from the front
speakers.
From and center
speakers, no rear
speaker 3 CH LOGIC
(3 channel
Logic)
The sound of the rear
channel is output
from the front
speakers.
Front and rear
speakere, and a
small center
speaker NORMAL The bass sound of the
center channel is
output from the front
speakers (because a
small speaker cannot
produce enough
bass).
Front and rear
speakers, and a
large center
speaker WIDE For "complete"
Dolby Pro Logic
Surround sound.
(continued)
15"