Cd player, No disc, Cd player continued – Califone PowerPro PA919PS User Manual

Page 9

Advertising
background image

15

16

CD Player

1

CD SLOT

2

LCD DISPLAY

3

PAUSE/PLAY

4

STOP

5

SKIP FORWARD

CD Player

NO dISC

After the power is turned on the LCD display will read “NO disc” Gently push the CD into the slot and

the CD will be recognized and begin playing track #1.

When “Play” is pressed, the first track will begin to Play. When Play is pressed again, the mode goes to

Pause. When pressed a third time the mode returns to Play.

When STOP is pressed from Play or Pause the program is advanced to the end of the last track on the CD.

When FWD is pressed from the Stop mode, the program will advance to the first track. When pressed

from Play or Pause mode, the program will advance one track. Continuing to press FWD will advance

one track each time.

1

9

8

4

3

2

7

10

6

5

CD PLAYER Continued

6

SKIP/REVERSE

When REV is pressed from the Stop mode, the program will go back one track and begin playing

the last track on the CD. When pressed from Play or Pause mode, the program will go back to the

beginning of the track which was already playing. Continuing to press REV will step back one

track at a time.

7

REPEAT/ENTER

Pressing Repeat once will continuously replay the selected track. Pressing it twice will replay all

tracks continuously. Pressing Repeat a third time will clear the settings.

8

SHUFFLE

Pressing Shuffle from Stop, Play or Pause will result in random selection of tracks and begin

playing continuously. Pressing Shuffle again will clear the program.

9

PROGRAM

In Stop mode, press Program and observe “P 1: ” on the LCD. Press FWD and see “1:01”, press FWD

again and see “1 :02”. Press enter and “2” will appear in the upper right of the LCD. Press FWD three

more times and see “1:05”. Press Enter and see “5” added to the LCD. Press play and the second track

will play, then advance to track 5. After playing all the selected tracks the program advances to the

end of the CD. Pressing Play will repeat the program. To clear the program in the Stop mode, just

press Program. Individual selections can be cleared while they are playing by pressing Program.

This will not affect other selected tracks.

10

EJECT

Pressing Eject from any mode will advance the program to the last track on the CD and eject the

CD. “NO dISC” will appear on the LCD.

NOTE: The CD player is capable of playing CD, CD-R and CD-RW discs, however due to the condition of the disc or the original it

was copied from some discs may not play.

califone_919SD_manual_rev1.indd 18-19

6/22/09 1:22 PM

Advertising
This manual is related to the following products: