Basic connections (connecting cabie tv or antenna) – Sony KP-6lHS20 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Basic Connections (Connecting Cabie TV or Antenna)
Installing and Connecting the Projection TV
Connecting Directly
to Cable or an
Antenna
The connection you choose depends on the cable found in your home. Newer
homes are equipped with standard coaxial cable (see □) ; older homes
probably have 300-ohm twin lead cable (see 0); other homes may contain
both (see B).
□ VHF Only or VHF/UHF or Cable
VHF/UHF
75-ohm coaxial ________ ^
cable
Rear of projection TV
0 VHF Only or UHF Only or VHF/UHF
300-ohm twin lead cable
VHF/UHF
Rear of projection TV
Antenna connector
0 VHFandUHF
75-ohm coaxial cable
300-ohm twin lead cable
VHF/UHF
..... Rear of projection TV
I
U/V Splitter
(not supplied)
Cable and Antenna
If your cable provider does not feature local channels, you may find this set
up convenient.
CATV cable
AUX
(No connection to
TO CONVERTER)
Antenna cable
TO
CONVERTER
VHF/UHF
I
Rear of projection TV
Select CABLE or antenna (ANT) mode by pressing ANT on the remote
control.
To receive channels with an antenna, you neect to turn your Cable to OFF
(SeC pa-gc s;u1 ;,-.;rfc--n; :bt; A,.-‘a i=:ug;-.im :jiii-;=i)r, .see page 5-3;
16