Connecting two vcrs for tape editing – Sony KP-6lHS20 User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installing and Connecting the Projection TV
Connecting Two VCRs for Tape Editing
If you connect two VCRs, you can record from one VCR to the other while
using your TV to monitor what is being recorded.
Disconnect all power sources before making any connections.
1
Using AUDIO and VIDEO cables, connect the playback VCR’s Audio
and Video OUT jacks to the recording VCR’s Audio and Video IN
jacks.
2
Using AUDIO and VIDEO cables, connect the recording VCR’s
AUDIO and Video OUT jacks to the projection TV’s AUDIO and
VIDEO IN jacks.
Rear of projection TV
/ To p-irfon
1
taps sciitng, set :he projecoon TV to ths video inpui inte: red
for playback by pressing TVA/IDEO on the remote control.
You may need to change the video input on your VCR. Consult your
VCRs operatinc manual fot insttuctions.
If your VCRs have an S VIDEO jack; For best picture quality, use an
S ViDEO connection instead of the yellow video cable on yout c^nbineb
Using an S VIDEO cable, connect the playback VCR's S VIDEO OUT jack
to the recording VCR's S VIDEO IN jack. S VIDEO does not provide audio,
so audio cables must stilt be connecten to provide souna.
/ You cannot record smnats *rom equipment r.onnectecf to Ihe Y Pf, p
22