Chauvet SX GOBO DMX512 - Manual (Page 8)

Figure A
Figure B
Figure C
Replacing Gobos
1) Open the top cover by removing the
six screws indicated in figure A.
2) Remove the retaining spring using a
flathead screwdriver (figure B).
3) Remove the gobo and replace with a
new gobo.
Note: The black side of the gobo should be
facing the lamp.
4) Reinsert the retaining spring.
Note: The two springs indicated in figure C
can be used to hold gel inserts or
dichroic glass. This is optional, and is
not included with the SX Gobo.
5) Replace the top cover.
SX Gobo Manual 8 2006-12-11/15:16