Sony BRAVIA KDL52V4100 - Manual (Page 16)

4. Setting Up the Channel List
- Initial Setup
The Initial Setup screen appears when you turn
on the TV for the first time.
• If the language that you have selected in the
Language setting is available from the broadcaster as
Alternate Audio language, your TV will
automatically switch to the matching language with
the Alternate Audio feature. The Alternate Audio
option may be accessed by pressing OPTIONS on the
remote control when an alternate audio stream is
available from the broadcaster. Alternate Audio is
available only for digital programs (see page .35).
4 Set the date and time.
Complete your cable connections (refer to the
preceding pages and the Quick Setup Guide
provided separately) before proceeding with
the Initial Setup.
Use the remote control to navigate through the
Initial Setup:
button:
Allows you to highlight options
where applicable.
© button:
Allows you to select the
highlighted option and advance
to the next screen.
> button:
Allows you to move back to the
previous screen.
^ button:
Allows you to move to the next
screen.
Follow the help text provided on the screen to
run Auto Program. Auto Program will
scan for available channels from the signal
source directly connected to the TV’s
CABLE/ANTENNA input.
If you receive channels from a cable box or
satellite receiver without using the CABLE/
ANTENNA input (e.g. using HDMI or
component input), skip Auto Program.
' If you select Skip, you will be asked to disable
Channel Tuning Keys to avoid accidental input
change while using an external input; see page 41 for
details.
Begin your TV Guide On Screen Setup
When the Initiai Setup is completed, the TV will
display this screen and prompt you to set up the
electronic program guide. Follow the on screen
instructions using your remote control.
Next, you will see a confirmation screen with
instructions on how to acquire the TV Guide On
Screen service.
• The service is free of charge.
• Your TV acquires program listing information
while your TV is turned off.
• Allow 24 hours (some areas may take longer)
for the TV to fully receive the program listing
information.
• Once the program information is obtained by
the TV, you will be able to view a guide of up
to two days of TV programming. See page 26
on how to use the TV Guide On Screen.
□ To Display TV Guide On Screen
Press GUIDE.
16