Sony BRAVIA KDL52V4100 - Manual (Page 28)

Using P&P and PIP Features
This TV comes with the P&P and PIP features
which aiiow you to view two pictures
simuitaneousiy. P&P (picture and picture)
provides two windows side by side. PIP (picture in
picture) provides PC input signai and TV
channeis.
• The CABLE/ANTENNA input must be connected to
use the P&P/PIP features.
• P&P is not available with 1080/24p video format.
• Closed Captions (CC) is available with P&P (see
page ,38).
P&P
Main Window •
PIP
Main Window
(PC)
'
Sub Window
Sub Window
(Location of
the Sub
Window can
■ be moved by
pressing
♦/♦/♦/♦.)
To Enter P&P and PIP
1 Press OPTIONS while watching one of the
following inputs: TV channels, Video,
Component, HDMI or PC.
2 Press ♦/'I- to highlight P&P or PIP and press (£
In main window In sub window
Video i/2/,3
TV channel
(CABLE/
ANTENNA)
Component I/2
HDMI IN l/2/,3/4
(except PC timing)
• To swap audio in P&P mode, use the button to
swap the highlight between the Main Window and Sub
Window.
• To swap audio in PIP mode, press OPTIONS, then
press ♦/♦ to highlight Audio Swap.
• Eor compatible PC Timings, refer to the PC Input
Signal Rererence Cliarl tsee page 14).
To Change Inputs or Channels
Press ◄■/'♦• to highlight the window to change for
P&P. Press to move the Sub Window for PIP.
• In the main window, press INPUT to select an
input to watch.
• In the sub window, change the channel by:
pressing CH+/-; entering the channel number
using the 0-9 numeric buttons; or pressing
JUMP to switch to the previously viewed
channel.
To Exit from P&P and PIP
1 Press OPTIONS.
2 Press
♦/f-
to highlight Exit P&P or Exit PIP
(depends on the mode you are in), and press
(T) to exit.
' You may also press RETURN while in these features
to exit.
' Additional compatible device with TV tuner is
required to watch two simultaneous live TV programs.
In main window In sub window
PC T\' channel
(CABLE/
ANTENNA) HDMI IN 1/2/.3/4 (PC timing)
28