Sony KP 51HW40 User Manual
Page 35
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using the Features
Button
POWER...
buttons
(GREEN)
T
unction
buttons
Yyjg\Q£o~~'
0-9
and
ENTER
CM
...............
GUIDE
“
menu
CH +/-
DRC/
CINEMOTION
WIDE MODE
Description
Turn on and off the projection TV and other audio/video
equipment you have programmed into the remote control.
For instructions, see “Programming the Remote Control”
on page 68.
Select the equipment (TV, SAT/CABLE) that you want to
operate. The indicator lights up momentarily when pushed
to show which device the remote control is operating.
Cycles through the video equipment connected to your
projection TV’s video inputs: TV, VIDEO 1, VIDEO 2,
VIDEO 3, VIDEO 4, VIDEO 5 and VIDEO 6.
Press 0 - 9 to select a channel, the channel changes after 2
seconds. Press ENTER to select immediately.
Turns on/offTwin View. For details, see “Using Twin
View^ “” on page 41.
Displays the program guide of your satellite.
Press to display the projection TV on-screen menu. Press
again to exit from the menu.
Scan through channels.
Press repeatedly to step through the available high
resolution picture modes: Interlaced, Progressive and
CineMotlon. For details, see “Using the Video Menu” on
page 49.
Press to step through the wide screen modes: Wide Zoom,
Normal, Full and Zoom. For details, see “Using Wide
Screen Mode” on page 47.
I
ti
3
(D
I
9i
S'
channels, press and hoid down
CH+ or CH-.
35