Sony STR-DE915 - Manual (Page 16)

Receiver Operations
Presetting Radio Stations
You'll most likely want to preset the receiver with the
radio stations you listen to often so that you don’t have
to tune in the station every time. The receiver can store
a total of 30 FM or AM stations. You can store the
stations on preset numbers combining 3 characters (A,
B and C) and numbers (0-9). For example, you can
store a station as preset number Al, B6, or C9.
MEMORY SHIFT AUDIO FUNCTION
Tuning preset stations (preset tuning)
You can tune directly to a preset station by entering its
preset number. If you don't know which stations are
preset on which numbers, you can tune by scarming
the preset stations.
1 Press AUDIO FUNCTION repeatedly until the
TUNER indicator lights up.
The last received station is tuned in.
2 Press SHIFT to select a memory page (A, B or C),
then press the number.
For example, select A and then press 7 to tune in
the station preset as A7.
'Q' You can tune by scanning the preset stations
Press AUDIO FUNCTION repeatedly until the TUNER
indicator lights up, and then press DISPLAY so that the
frequency display appears. Then press PRESET
TUNING + or - to select the station you want. Each
time you press the buttons, the preset numbers change
as follows:
Press AUDIO FUNCTION repeatedly until the
TUNER indicator lights up.
The last received station is tuned in.
+Al«->A2'.-»...-e-»A0-e-*Bl*->B2-e->....e-»B0f
-------------------►C0'^-»...C2-e-rCl<------------------
2 Tune in the station you want.
li you are not familiar with how to tune in a
station, see "Receiving Broadcasts" on page 15.
3 Press MEMORY..
"MEMORY" appears for a few seconds.
Do Steps 4 and 5 before "MEMORY" goes out.
4 Press SHIFT to select a memory page (A, B or C).
Each time you press SHIFT, the letter "A," "B" or
"C" appear in the display.
5 Press the number you want to use (0 to 9).
If "MEMORY" goes out before you specify the
preset number, start again from Step 3.
6 Repeat Steps 2 to 5 to preset other stations.
To change a preset station
Preset a new station on the number you want to
change.
Note
If the AC power cord is disconnected for about one week,
the preset stations will be cleared from the receiver's
memory, and you will have to preset the stations again.
Indexing Preset Stations and
Program Sources
You can enter a name of up to 8 characters for preset
stations (station index) and program sources. These
index names (for example, "VHS") appear in the
receiver's display when a station or program source is
selected.
Note that no more than one name can be entered for
each preset station or program source.
This function is useful for distinguishing components
of the same kind; 2 VCRs, for example, can be specified
as "VHS" and "8MM," respectively. It is also handy for
identifying components connected to jacks meant for
another type of component; for example, a second CD
player cormected to the DAT / MD jacks.
Digital processing
16
DISPLAY VIDEO/AUDIO FUNCTION