7b do this – Sony KP- 57WV600 User Manual
Page 24
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1
Connect the cable from your cable company to the TV's
VHF/UHF jack.
2
Use a coaxial cable to connect the TV's TO CONVERTER jack to
the cable box's input jack. (The TV's internal converter lets you
switch between unscrambled signals coming straight into the TV
and scrambled signals coming in through the cable box,
eliminating the need for an external splitter.)
3
Use a coaxial cable to connect the cable box's output jack to the
TV's AUXjack.
4
Run the Auto Setup program, as described in "Setting Up the
Channel List" on page 43.
To connect the cable box and cable
IN
Cable box
Coaxial cable
AUX
OUT 3
TO
CONVERTER
75-ohm coaxial cable
(not supplied)
CATV cable (unscrambled channels)
VHF/UHF
Notes on Using This Connection
7b Do This...
Use the cable box
Set up the TV remote control
to operate the cable box
Activate the remote control to
operate the cable box
Prevent the accidental
switching of TV channels
Switch the TV's input
between the cable box and
cable
Do This
...
Tune the TV to the channel the cable box is set to (usually channel 3 or 4)
and then use the cable box to switch channels.
Program the remote control. See "Programming the Remote Control" on
pages 51-52.
Press SAT/CABLE
function
!.....................................................................................
When using the cable box, you need the TV to stay on the channel the cable
box is set to (usually channel 3 or 4). You can use the TV's Channel Fix
feature to lock in a specific channel. For details, see "Using the Channel
Menu" on page 78.
Press ANT to switch back and forth between the TV's VHF/UHF
(unscrambled channels) and AUX (scrambled) inputs.
23