Electronic graphic equalizer, Setting new equalization curves, To cancel the selected mode – Sony AV-DV75 User Manual
Page 10: To select with the remote control, To adjust the geq curve temporarily, To select the manual preset curve, I................ii
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ELECTRONIC GRAPHIC
EQUALIZER
SETTING NEW EQUALIZATION CURVES
Up to 4 equalization curves can be stored as the manual modes
Ml to M4.
■GEQ
2 1,5,7
This unit provides the following five different equalization modes.
ROCK:
Powerful sound emphasizing treble and bass
POP:
More presence in the vocals and midrange
JAZZ:
Accented lower frequencies for jazz-type music
CLASSIC:
Enriched sound with heavy bass and fine treble
BGM:
Calm tone with suppressed bass and treble
Press the GEQ (Graphic Equalizer) button, and turn the
MULTI JOG until the desired equalization mode is displayed.
The GEQ modes are displayed cyclically as follows.
ROCK-
POP-
JAZZ-
CLASSIC
-BGM-
M4
M3
M2-
M1
Manual mode
The selected mode name is displayed for four seconds, and the
► indicator appears on the left side of the selected mode name.
I : f
-8
:
• ' / i '
A ■ ■ i*'.vl
f'iijCK
...... .
Selected mode
To cancel the selected mode
Press the GEQ button to display the GEQ mode name, and press
the button again within 4 seconds. “GEQ OFF” appears on the
display.
To select with the remote control
Press the GEQ button repeatedly until the desired equalization
mode is dispiayed.
Five preset modes, the manual modes GEQ Ml to GEQ M4 and
“GEQ OFF” can be selected.
1 Press the GEQ button and press the ENTER
button within 4 seconds.
RocKirropir;
I................ii
2 Press the DOWN or UP button to seiect a
frequency.
The level indicator of the selected frequency flashes.
3 Turn the MULTI JOG to adjust the ievei of the
seiected frequency.
4 Repeat steps 2 and 3 to make the desired
equaiization curve.
In steps 2 and 3, the unit returns to normal mode when no
operation is made for about 8 seconds.
5 Within 8 seconds, press the ENTER button.
“GEQ M1” appears on the display.
6 Turn the MULTI JOG to select a preset number
from Ml to M4.
7 Press the ENTER button.
The equalization curve Is stored.
The selected preset number and the equalization curve are
displayed for a few seconds for each.
To adjust the GEQ curve temporarily
Follow the steps from 1 to 4 above. The adjusted GEQ curve
still remains before changing or canceling the GEQ mode.
To select the manual preset curve
Press the GEQ button, and turn the MULTI JOG until the desired
manual preset number is displayed.
ENGLISH