Sony AV-DV75 - Manual (Page 14)

t
I
MANUAL TUNING
MONO
TUNER
To change the AM tuning interval
The default setting of the AM tuning interval is 10 kHz/step. If
you use this unit in an area where the frequency allocation
system is 9 kHz/step, change the tuning interval.
Hold down the DIGITAL/ANALOG/BAND button and press the
POWER button.
To reset the interval, repeat this procedure.
Turn the FUNCTION to select theTUNER function,
and press the DIGITAUANALOG/BAND button
repeatedly to select the desired band.
FM------- ► AM ■
□
The display changes to frequency indications after indicating
band and video source (V1, V2 or V3) for two seconds.
Press the UP or DOWN button on the main unit
to seiect a station.
Each time the button is pressed, the frequency changes.
When a station is received, “TUNE” is displayed for two
seconds. During FM stereo reception, (((®ill is displayed.
rPANCH ruvEl rHgn P ahewa I_________ • •
To search for a station quickly (Auto Search)
Keep the UP or DOWN button on the main unit pressed untii the
tuner starts searching for a station. After tuning in to a station,
the search stops.
To stop the Auto Search manually, press the UP or DOWN button.
• The Auto Search may not stop at stations with very weak
signals.
When an FM stereo broadcast contains noise
Press the MONO TUNER button on the remote control so that
“MONO” appears on the display.
Noise is reduced, although reception is monaural.
MONO
To restore stereo reception, press the button so that “STEREO”
appears.
When the reception contains noise interference
Move the unit away from other electrical appliances, especially
digital audio devices, or turn off the appliances that generate
noise signals.
1 3 ENGLISH