To exit the osd, Adjusting the picture brightness – Sony CPD-120VS User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2.
Press the ® +/- buttons to adjust the picture contrast.
+ for more contrast
- for less contrast
3 t
The VOLUME/CONTRAST OSD disappears 3 seconds after you release
the buttons.
Adjusting the picture brightness
The adjustment data becomes the common setting for all input signals.
1. Press the ® button.
The BRIGHTNESS/GPE OSD appears.
B R I G H T N E S S
■0:
m
!□
50
□
G P E
'0 -1
-2 -3
0
Q
2. Press the ^ +/- buttons to adjust the picture brightness.
+ for more brightness
- for less brightness
♦
^ - t -
To exit the OSD
Press the © button again.
Tip
If you don't touch any buttons the OSD automatically disappears after 10 seconds.
When you want to adjust another item, press the button of the item. The OSD of the selected
item appears.
18
Adjustments