Geometry, To exit the osd, Adjusting the picture rotation – Sony CPD-120VS User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Adjusting the picture rotation
The adjustment data becomes the common setting for all input signals.
1. Press the O button.
The GEOMETRY OSD appears.
GEOMETRY
O
O
50
Q 1 0 0 Q
2.
Press the ^ +/- buttons.
+ to rotate clockwise
- to rotate counterclockwise
To exit the OSD
Press the O button again.
Tip
If you don't touch any buttons, the OSD automatically disappears after 10 seconds.
When you want to adjust another item, press the button of the item. The OSD of the selected
item appears.
Adjustments
21
Advertising