Country Flame FP42 User Manual

Page 11

Advertising
background image

INTR

he fireplace is an American tradition. It remains a central feature of many homes and provides
comfort and enjoyment for years to come, if designed and installed properly. Country Flame
continues an American Tradition with decades of experience in manufacturing high quality
practical fireplaces. To get the most out of a Smart Fireplace Furnace, ensure competently

trained installation personnel follow all restrictions and clearance requirements listed in this manual in
accordance with all state, local or national zoning and building codes. This manual provides basic
information for proper installation. Consideration must be given to site specific conditions and designs.
All fireplaces contain essentially the same elements: a base, a combustion chamber, a smoke chamber,
and a chimney system. Requirements for installation are based on the 2003 International Residential
Code.
Contact your state and local building codes departments along with the local fire department to
ensure proper installation requirements have been met. Failure to properly install a fireplace furnace
system can cause a house fire. Country Flame Technologies disavows any liability for any damages that
may occur as a result of improper installation or misuse of the Smart Fireplace Furnace manufactured by

lame Technologies

ODUCTION

T

Country F

peration of the Smart Fireplace Furnace should be in accordance with this manual and should
be operated in accordance with any local zoning codes or local operating restrictions. Home
heating is usually achieved by burning natural gas, fuel oil, or propane. The combustion
process, including the fuel supply, can be mechanically controlled. This is not the case with

solid fuel. Solid fuel burning is very unpredictable as there are many variables affecting the combustion
process. Adding fuel is a manual operation. The amount of wood added depends on the individual
operating the system. Also, the requirement for combustion air changes during the burning of a load of
wood. Thus the temperature of the wood fire system varies considerably. Burning solid fuel is relatively
dirty, compared to liquid fuels, with the buildup of ash and residue. Importantly, there are very limited
automatic safety devices. If the firebox temperature reaches an unsafe temperature do to over firing,
there is no means to just “turn off” the flame; as a result, controlling a wood fire takes more knowledge
and care than most liquid fuel burning processes. A homeowner must understand they are basically
burning a fire in the middle of their home. It is both prudent and wise for the homeowner to ensure the
fire can be restricted (limit combustion air) and under control (do not allow over firing) in order to enjoy
a safe warm fire to provide maximum heat energy in the home without endangering the surroundings or

ts.

O

the occupan

aintenance requirements contained in this manual must be followed to ensure proper
operation of the Smart Fireplace Furnace. Failure to follow maintenance requirements will
reduce efficiency of operation or can create unsafe operating conditions. The majority of
fires and accidents that occur with wood burning fireplaces are a result of improper

maintenance. A visual inspection of the fireplace box, the chimney connector and the chimney will
reduce the possibility of uncontrolled fires or assist in preventing accidents from occurring. Immediately
contact your local fire department representative, your local Country Flame Dealer, or a fireplace
specialist should a problem be detected with your fireplace furnace. It is the responsibility of the operator
of the fireplace furnace product to become familiar, understand, and ensure adherence to all maintenance
requirements associated with proper operation of this product. Failure to adhere to maintenance
requirements voids Country Flame’s product warranty. Monthly inspections should ensure that dampers
and all moving parts are properly working. The chimney, firebox, and chimney connectors should be
professionally inspected and cleaned at least once a year. As with any product, the efficiency of your
wood burning fireplace furnace depends on how well the Country Flame product is maintained. Your
Country Flame Dealer will be happy to assist you in ensuring your fireplace furnace product is
maintained in the best possible state. Keep his number handy.

Version 7.1

x

M

Advertising
This manual is related to the following products: