Sony SLV-M20HF - Manual (Page 17)

Hookup 3 Pages 17 to 19
Antenna hookup
Make the following connections if you're using an antenna (if you don't
have cable TV).
□ Use this hookup if you're using:
• VHF/UHF antenna (you get channels 2-13 and channels 14 and higher)
• UHF-only antenna (you get channels 14 and higher)
• Separate VFIF and UHF antennas
HJD»-......... ....................................... CSD wwii»-
Rear of TV
VHF/UHF
-----@A f Match the type of
connector on your
TV; A, B, or C.
B
UHF
VHF
UHF
B Use this hookup if you're using a VHF-only antenna (you get
channels 2-13 only)
Rear of TV
VHF/UHF
■-—H@ A
VHF
—il'
UHF
VHF
UHF
Match the type of
connector on your
TV; A, B, or G.
For connector types
B and C no UHF
connection is
required.
If you cannot connect your antenna cable to the VCR directly
If your antenna cable is a flat cable (300-ohm twin lead cable), attach an external
antenna connector (not supplied) so you can connect the cable to the VHF/UHF IN
connector. If you have separate cables for VHF and UHF antennas, you should use a
U/V band mixer (not supplied). For details, see page 44.
continued