Sony SLV-M20HF User Manual
Page 25
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
o Enter your DSS receiver code number and push
the cursor stick to For details, see page 35.
© Set your DSS receiver
output channel (BOX
OUTPUT CH) to LINE
and press the cursor
stick (OK).
¡SETUP
aEBsa
CABLE BOX CONTROL
CABLE MOUSE
ON lOFF 1
1 BOX CODE NO.
1 BOX OUTPUT CH
LINE
L
Use
[■»•■►I
to select
----------—---------
1
CABLE
1 BOX CH. Then push ® |
CABLE MOUSE
ISEaSEHZBU
BOX OUTPUT CH
Enter your CABLE BOX
Code No. us i ng
(0-9l
keys
Refer to the Operating
Manual for the Code
SET UP is done
Note
Normal display
To successfully record a program from the DSS receiver, proceed as follows;
- Leave the DSS receiver on all the time.
- Turn off the display (menu screen, channel number, etc.) of the DSS receiver.
- To record or receive locked channels, unlock the channel before the VCR starts
recording.
- To set pay-per-view programs in the timer setting, order the pay-per-view
program before the VCR starts recording.
- Some programs are copy protected. You cannot record these programs.
continued