Sony SPP-A957 - Manual (Page 32)

Picking up new messages
1
Call your phone from a touch-tone phone.
2
While you hear your greeting play, press CD, and your remote ID code
(security code).
You hear a long confirmation beep and the greeting stops. Following the
voice guide informing you of the number of messages recorded, the
phone stands by for you to enter a control code.
3
To do other operations, enter the control code within 20 seconds (see the
table below). To quit, hang up the phone.
Control codes for remote operations
To Press
Play back messages in MAILBOX 1 CD CD
Play back messages in MAILBOX 2 CD CD
Play back messages in MAILBOX 3 CD CD
Repeat the current message CD CD while the message is being played back
Skip the current message CE) C® while the message is being played back
Erase the current message (5) (S) while the message is being played back
Erase all messages in MAILBOX 1 CD (D CD CD
Erase all messages in MAILBOX 2 CD CD CD CD
Erase all messages in MAILBOX 3 (D CD (D CD
Record a new greeting
(up to one minute)
CD CD- When you hear a long beep, start recording
your greeting. Press (D CD to stop recording.
Turn on the answering function CD CD
Turn off the answering function CD CD
Stop the current operation CD CD
If you forgot to turn the answering function on
Call your phone and let it ring 10 times until it answers. Then the
answering function automatically turns on.
Note
If you enter a wrong security code three times, the line will be disconnected.
To use the toll-saver feature
Set RINGER SELECT to TS. See page 26 for details.
Answering Machine Features