Note – Sony GV-8 User Manual
Page 28
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Make sure that the power source is connected to the unit.
1 Open the cassette holder with the EJECT button.
EJECT —^
While pressing,
slide to the right.
Insert the cassette with the window side up.
Close the cassette holder.
When you slide the EJECT button, the power will be supplied and the cassette
holder will be opened even if the power is turned off. When the cassette holder
opens, the power will be turned off automatically. Press POWER if you want to
continue the operation.
To eject a cassette
Use the EJECT button. Make sure the tape is not running.
Note
Do not open the cassette holder while the unit is in the vertical position. If you
do, the cassette may fall out of the holder and it can be damaged.
28