About tile recorded sound, To change the channel during recording, Are you having trouble – Sony GV-8 User Manual
Page 32: Recoiding/playbadc time, Ícassettés¿ahditheir recordiiiígltirrié
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
About tile recorded sound
The VOLUME control setting has no effect on the recording level.
To change the channel during recording
Set the unit in the recording pause mode by pressing || and then select another
channel.
You cannot watch another program while recording.
Are you having trouble?
Possible cause
Correction
The safety tab on the
cassette is slid out.
Slide the tab in or use a
new cassette.
The tape is at its end.
Rewind the tape or use
a new cassette.
No cassette is
inserted.
Insert a cassette.
Symptom
“CASSETE” indication is
displayed when you press
the REG button.
Recoiding/playbadc time
Two tape speeds can be selected with the SP/LP selector.
The recording time in the LP mode is twice as long as that in the SP mode. For
better picture and sound, recording in the SP mode is recommended. During
playback, the mode in which the tape was recorded is selected automatically.
íCassettés¿ahditheir recordiiiígltirrié^
speed
Cassette
Recording time
SP mode
LP mode
P6-15
15 min.
30 min.
P6-30
30 min.
1 hr.
P6-60
60 min.
2 hrs.
P6-90
90 min.
3 hrs. --------------
P6-120
120 min.
4 hrs.
32