Sony ICF-CD833 - Manual (Page 9)

Notes
• Do not open the CD compartment lid during
playing, otherwise, the disc will be damaged.
Be sure to stop the disc first.
• When you press CD Ml, if there is no disc in the
CD compartment, the "00" indication flashes
for about 10 seconds and the unit will be turned
off.
• If theflcJ] alarm time comes during listening
to the CD, the track changes to that preset by
pressing
BAND/WAKE UP TRACK.
Playing the Radio
Manual Tuning
1. Press RADIO/SLEEP.
The "RADIO" indication lights and the
band and frequency of the last station
chosen appear in the display. After 10
seconds, the indication becomes the
current time but the "RADIO"
indication remains.
2. Press BANDAWAKE UP TRACK to
select the band, FM or AM.
Each press of BAND/WAKE UP
TRACK changes the band from FM to
AM or vice versa.
3 . Tune in a station by pressing TUNING/
TIME SET + or -.
The FM channel step is set to 0.1 MHz
and the AM channel step is set to 10 kHz.
Beeps sound at the band edge. After 10
seconds, the indication becomes the
current time but the "RADIO" indication
remains.
4 . Adjust VOL.
• To turn off the radio, press CD or OFF/ALARM
RESET
• To improve radio reception
FM: Extend the FM wire antenna to improve
FM reception.
AM: Rotate the unit horizontally for
optimum reception. A ferrite bar
antenna is built into the unit.
• To check the station you are listening to, press
RADIO, The band and frequency appear for 10
seconds.
Preset Tuning
You can preset up to five FM/AM stations (one
station for each MEMORY PRESETS number
button 1 to 5.)
Setting the Alarm
You can set the CD, radio and buzzer alarms at
the preset time. Before setting the alarm, be sure
to set the clock. (See "Setting the Clock".)
Setting the Alarm Time
To set the Mml alarm
1. While holding down ALARM A, press
TUNING/TIME SET + or - till the
desired time appears in the display
window. The "Bcol" flashes.
2 . Release ALARM A. The alarm time is
set and the indication becomes the
current time.
3 . While holding down BAND/WAKE UP
TRACK, set the desired track by
pressing TUNING/TIME SET + or -
4 . Release BANDrtA/AKE UP TRACK.
The track is preset and the indication
becomes the current time.
n c
u J
n. i c
u- I J
Note
When the CD player is preset to start with track
5, it will always start with track 5 even though
you change the CD, unless you change
BAND/
WAKE UP TRACK.
To set thelH /tAD/ol/ITst/ZZEft lalarm
1. While holding down ALARM B, press
either TUNING/TIME SET + or - till the
desired time appears in the display
window.
The "JJi
RADIO I" or "H BUZZER] " and
"indication flash.
2 . Release ALARM B. The alarm time is
set and the indication becomes the
current time.
Setting the Alarm Mode
Before setting MODE, be sure to set the alarm
time. (See "Setting the Alarm Time".)
1. Press MODE till the alarm you want
appears in the display window.
Each time you press
MODE, the alarm
indication chanj^es as follows.