Compaq P5000 Series - Manual (Page 173)

173
W
warm start A reboot or soft reset. The following occurs:
1) data are cleared from all buffers (I/O and internal print
buffers); 2) all internal system variables are reset to
default values, which is transparent to the user; and 3)
the power-up configuration values-except the host I/O
selection-are loaded. If the user has not defined power-
up configuration values, the printer resets to the factory
default configuration values.
weight See character weight.
write To store data to memory (RAM) or to mass storage (hard
disk, floppy diskette, etc.).
X
X-OFF A character transmitted by the printer announcing that
the printer is off-line or the buffer is almost full.
X-ON A character transmitted by the printer announcing that
the printer is on-line or the buffer is almost empty.