Compaq P5000 Series - Manual (Page 82)

82
Chapter 4 LinePrinter+
Proprinter XL Emulation
Define CR Code
This option controls the action of the printer when it receives a Carriage
Return code (hex 0D) from the host computer. If this feature is enabled, each
time the printer receives a Carriage Return, it inserts an additional Line Feed
code (hex 0A) into the data stream. Do not use this feature if the host
computer sends Line Feeds to the printer.
• CR = CR. Does not insert an extra Line Feed after each Carriage Return.
• CR = CR + LF. Inserts an extra Line Feed after each Carriage Return.
Auto LF
This option defines the printer actions when print data is received past the
forms width setting.
• Enable. Performs an automatic carriage return and line feed when data is
received past the forms width.
• Disable. Discards any data past the forms width.
Printer
Protocol
(from page 78)
Define CR
Code
Auto LF Define LF
Code
FF Valid at
TOF
Character Set Alt. Char Set 20 CPI
Condensed
CR = CR*
CR = CR + LF Enable*
Disable LF = LF*
LF = CR + LF Enable*
Disable Code Page 437*
Code Page 850
OCR-A
OCR-B
Code Page 210
Code Page 220
Code Page 852
Code Page 855
Code Page 857
Code Page 862
Code Page 866
Lithuanian 1
Lithuanian 2
Hebrew New
Hebrew DEC
Hebrew Old
Latin 9 8859-15 Set 1*
Set 2 Enable*
Disable
* = Factory Default
Proprinter XL