Skip step 4 to select tracks from the same disc, 8 press o, Playing cds without interruption – Sony LBT-D690 User Manual
Page 21: 3 press o, To cancel non-stop play
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
7
To program additional tracks,
repeat steps 4 through 6.
Skip step 4 to select tracks from the
same disc.
8
Press O.
All the tracks play in the order vou
selected.
To cancel Program Play
Press PLAY MODE repeatedly until
"PROGRAM" or "SHUFFLE" disappears
from the display.
To
Press
Check the program
CHECK on the remote
repeatedly. After the
last trackj "CHECK
END" appears.
Clear the last selected
CLEAR on the remote
track
in stop mode.
Clear a specific track
CHECK on the remote
repeatedly until the
number of the track to
be cleared lights up,
then press CLEAR.
Add a track to the
1 Press DISC SKIP to
program
select a CD.
2 Turn the jog dial to
select a track.
3 Press PLAY MODE.
Clear the entire
1 once in stop mode or
program
twice while playing.
Tips
• The program you created remains in the CD
player's memory even after it has been played.
Press O to play the same program again. ,
• I f a p p e a r s instead of the total playing time
while programming, this means:
- you have programmed a track numbered over
20, or
- the total playing time has exceeded 100 minutes.
Playing CDs without
interruption
— Non-Stop Play
You can play CDs without pausing between
tracks.
1
Press FUNCTION repeatedly until
"CD" appears in the display.
2
Press NON-STOP so the indicator
on this button lights up.
3
Press O.
To cancel Non-Stop Play
Press NON-STOP so the indicator on this
button goes off.
21