Table of contents h checklist, Precautions, Installation – Sony GDM-2000TC User Manual
Page 3: Warning on power connection, Maintenance
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Table of Contents H Checklist
Checklist .................................................................................................>
Using on-screen menus........................................................................ IS
Operating through menus...................................................................4
COLOR TEMPHRAI'URF:
fine
adjustment .................................... 10
Uniformity adjustment..................................................................... 10
Power saving function................... ...................................................... 12
Ik-fore using this monitor, please make sure that the
lollowing items are included in your package:
CnM-20()0TC Monitor (1)
CDM-20(H)TC Control stand (1)
Precautions
Installation
I Pre\'ent internal heat build-up by allowing adequate air
circulation. Do ncit place the unit on surfaces (rugs,
blankets, etc.) nor near materials (curtains, draperies) that
may block the ventilation holes.
' Do not install the unit near heat sources such as radiators
or air ducts, nor in a place subject to direct sunlight,
excessive dust, mechanical vibration or shock.
• Do not place the unit near equipment which generates
magnetism, such as a converter or high voltage power
lines.
Warning on Power Connection
> Use the supplied power cord.
Example of plug shape:
GDM-CSIO RGB sensor (1)
m
Power cord (1)
Gable damp (1)
for 100 to 120 V AC
for 220 V to 240 V AC
To disconnect the power cord, w-ait for at least ,20 seconds
after turning off the pow'er for discharging the static
electricity on the C'RT display surface.
After the power has been turned on, the CRT is
demagnetized for approximately
5
seconds. This
generates a strong magnetic field around the bezel which
may affect the data stored on magnetic tape or disks near
the bezel. Place such magnetic recording equipment and
tapes/disks at a distance from this unit.
The sxK'ket-outlet shall be installed near the erjuipment
and shall be easily accessible.
Maintenance
Warranty card (1)
Fhis operating mstruction manual (1)
Clean ihe cabinet, panel and controls with a soil cloth
lightly moisteneil with a mild detergent solution. Do not
use anv type ol abr,isi\-e pad, scouring powder or soUx-nt
such <is a Icohol
<
>r I'len/i ne