Sony KV-20VM40 - Manual (Page 21)

Selecting stereo or bilingual
programs
( kv -2 ovs 4 o only)
The Multichannel TV Sound (MTS) feature allows you to switch between
stereo, mono, and Second Audio Program (SAP).
1
Press MENU to display the main menu.
2
Move the cursor (►) to "AUDIO" with + ■(> or - O and press SELECT.
The AUDIO menu appears.
AUDIO
►BASS
TREBLE
BALANCE
MTS:
STEREO
SURROUND : ON
PMENU
MoveQlS SelectSSD Exitogwa
3
Move the cursor (►) to "MTS" with + O or - O and press SELECT.
The selected position turns red.
AUDIO
BASS
TREBLE
lUtlUNIIIIIIti-x..... ..................................
BALANCE
MTS;
STEREO
SURROUND : ON
7MENU
Move(£i!|) Select^^D Exitggwt
4
Using + O or - O, select "STEREO," "SAP," or "MONO" and press
SELECT.
AUDIO
BASS
TREBLE
Maiguwiii<'*»<-«>"
BALANCE
►MTS: SAP
SURROUND : ON
7MENU
Moveil)@ SelectSBD Exiles
Note
If you set MTS to "SAP' and a SAP
signal is not being broadcast, no
sound will come from the speakers.
(However, the program's primary
audio channel will be recorded.) See
page 22 for a table describing the
relation between the speakers and
the source signal.
Choose To
STEREO Select for stereo reception when,viewing a program broadcast in stereo.
SAP Select to listen to a bilingual broadcast.
MONO Select for mono reception (use to reduce noise during stereo broadcasts).
To restore the factory settings
Press RESET after selecting and displaying the AUDIO menu.
All of the settings are restored to the factory settings.
Basic Operations I 21