Sony KV-20VM40 - Manual (Page 29)

Recording TV Programs
EJECT
©
MUIHMÜ UIS>^TJ\Y
O CD
TIMER ON SCREEN
Q
RESET
Q CD
VCR Plus fc Q © © ©
© © ©
»UNTER/
REMAIN \ ^
CD (a) (?
»UNTER «Sin
S O ® ‘
INDEX
Q
VÜL CH
i ®
— l►SLOW— «►
CZ> OJ Q
Note
If the ON or OFF timer is activated
during recording, the TV screen
turns on or off, but the recording
continues.
To record from a cable box, turn it on.
3 Press TAPE SPEED to select the recording speed, SP (Standard Play), or EP
(Extended Play). Recording in EP mode will extend the length of your
tape.
Maximum recording time
SP mode: 2 hours 40 minutes with T-160
EP mode: 8 hours with T-160
4 Select the channel with CH +/-. You can also use the 0-9 buttons on the
remote control. To enter double-digit numbers (such as 24), first press 2,
. then press 4.
5 Press REC •.
The REC lamp on the front of the Video/TV lights up and recording
begins.
To stop recording
Press STOP ■.
When the tape reaches the end, it stops and ejects the cassette.
To pause recording
Press PAUSE II.
To resume recording, press PAUSE II again.
You can cut out an unwanted scene during recording with this button.
1 Press PAUSE II when an unwanted sCene appears on the screen.
Recording pauses.
2 Press PAUSE II again to release the pause mode at the desired scene.
Recording resumes from the point set in step 2.
When the recording pause mode is left on for more than 5 minutes, the
Video/TV stops recording.
Recording with the TV off
Press POWER.
The TV screen is turned off and the STANDBY lamp and REC lamp on the
front of the Video/TV light up.
The Video/TV continues recording.
Basic Operations I 29