CyberHome Entertainment Cyber Home CHLDV712 - Manual (Page 19)

Connecting to a TV with Component Video Inputs
Component Video separates the Video Signal into three separate “components”, resulting in a higher
quality picture than S-Video or Standard Composite Video. In order to use Component Video, you
must use a TV equipped with Component Video Inputs. You’ll also need (3) Component Video Cables
(included).
Component Video & Progressive Scan Connections
18
Y
Cb
Cr
PROGRESSIVE SCAN /
COMPONENT VIDEO IN
TV
GREEN OR YELLOW
RED
BLUE
3
Step 1: Enter the Setup Menu to Change the Video Setting
With disc play stopped, press the SETUP button on the Remote Control to enter
the DVD Player’s On-Screen Setup Menu. Use the ARROW keys to navigate
down to the VIDEO menu and press ENTER or Right Arrow Key. Use the
ARROW keys again to proceed down to the OUTPUT setting. Press ENTER and
then use the UP/DOWN keys to select YCbCr. Press ENTER to confirm your
choice.
Step 2: Connect the Player using the Component Video Cables
At this point, connect the separate Component Video Cables to the appropriate jacks.
Normally, cables and jacks are color-coded to make connection easier. Power on TV and set your TV to the Video In
Channel associated with the Component Video inputs (“Video 3”, “Input 3”, etc.) Lastly, press the MONITOR button
on the DVD player or Remote to switch the video mode to EXTERNAL MONITOR. You should now see the DVD
Player splash screen on your TV.
Component Video
Connectors
Step 3: If You Are Using a PROGRESSIVE SCAN TV
Now that you are using the Component Video Outputs, you can change the
OUTPUT setting to enable Progressive Scan mode. Do not change these settings
if you are not SURE your TV supports Progressive Scan.
Using the ARROW and ENTER keys, change the OUTPUT setting to YPbPr. The
DVD Player is now in Progressive Scan mode. Exit the setup menu by pressing the
SETUP button.
Quick Tips
If you need to reset the
Player’s Video Settings to
factory defaults, Reset the
player, Open the Disc
Cover and press “STOP -
2 - 0 - 0 - 2” on the
Remote Control.
LANG.
VIDEO
AUDIO
CHILD
OTHERS
EXIT
SYSTEM NTSC
ASPECT 4:3 PS
OUT PUT YCbCr
ENTER RETURN SETUP
For Help on Using the Setup Menu, see pg 38.
For Help on Using the Setup Menu, see pg 38.
VIDEO
DVD DVD DVD DVD
LANG.
VIDEO
AUDIO
CHILD
OTHERS
EXIT
SYSTEM NTSC
ASPECT 4:3 PS
OUT PUT YPbPr
ENTER RETURN SETUP