To stop recording, Playing a tape – Sony MHC-RXD9 User Manual

Page 16

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Recording front the radio

(continued)

3

Press = and insert a recordable tape
into deck B.

With the side
you want to

record facing

forward

4

Press REC PAUSE/START.

Deck B stands by for recording.

5

Press DIRECTION repeatedly to

select to record on one side.
Select (or RELAY) to record on

both sides.

6

Press REC PAUSE/START.
Recording starts.

To stop recording

Press ■.

Tips

• If you want to record from the reverse side, press

TAPE B to light its indicator after pressing
REC PAUSE/START in step 4.

• When you record on both sides, be sure to start

from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.

• To record non-preset stations, use

+

and - in step 2

to tune in the desired station manually.

• When you want to reduce the hiss noise in low-

level high-frequency signals, press DOLBY NR so
that "DOLBY NR" appears after pressing REC
PAUSE/START in step 4.

• If noise is heard while recording from the radio,

move the respective antenna to reduce the noise.

Playing a tape

You can use any type of tape, TYPE I
(normal), TYPE II (Cr02) or TYPE IV (metal),
since the deck automatically detects the tape
type. You can also use the jog dial's AMS
functions to quickly search for songs you
want to hear. To select either deck A or B,
press DECK A ► or DECK B ►- on the
remote.

1/(1)

•>

(Power)

II

DECK A

I

DECK B I

VOL +/-

1fi

Advertising